Answers to all your questions about the DJI Mini 3 Pro
1. What improvements does DJI Mini 3 Pro have compared to previous products?
The flight time of the drone is 34 minutes measured with a smart flight battery and a constant speed of 21.6 km/h without wind.
2. Why does the DJI Mini 3 Pro have a completely new look?
The new design of DJI Mini 3 Pro brings the following advantages:
1. Longer battery life with the same compact size: The new design allows for larger propellers to be attached, improving propeller and aircraft performance, resulting in longer battery life.
2. Wider detection area: The new design allows the integration of sensors with a larger field of view, increasing the detection range. So the Mini 3 Pro offers more powerful vision sensors that improve flexibility and safety during flight and obstacle avoidance.
3. True vertical shots and extended axes: The new design allows for portrait shots without the need for digital cropping. More freedom of gimbal movement means more filming possibilities and more creative freedom. Even when flying at top speed with a sharp forward roll of the aircraft, there are fewer restrictions on the gimbal and thus on the filming angle.
How do I fly the dji Mini 3 Pro after opening the box?
For shipping safety, DJI Mini 3 Pro batteries are put into sleep mode before shipping.
Before first use, the battery must be fully charged to activate.
After activating the battery, press and hold the power button once to turn on the aircraft.
How do I activate DJI Mini 3 Pro?
With DJI RC-N1 remote control:
Connect your mobile device (with an internet connection) to the remote control, then connect to the Mini 3 Pro using the DJI Fly app. Follow the in-app instructions to activate the Mini 3 Pro.
With DJI RC remote control:
When using the DJI RC remote control for the first time, connect to Wi-Fi or a smartphone hotspot to connect to the Internet and follow the in-app instructions to activate the DJI RC. After activating the DJI RC remote control, connect it to the DJI Mini 3 Pro via the DJI Fly app. Follow the in-app instructions to activate the quadcopter.
Is the Dji Mini 3 Pro waterproof?
No. Avoid contact with water during use as it may damage the device. If it rains during the flight, please turn around as soon as possible, land and wait until the aircraft is completely dry inside and out before using it again.
Which program should I install before using DJI Mini 3 Pro?
The Mini 3 Pro can only be used with the DJI Fly app. You can download the DJI Fly application from the download section of the official DJI website.
If you are using DJI RC as a remote controller, the DJI Fly app is already installed.
Why are the rear vision sensors of DJI Mini 3 Pro installed on the top of the drone?
DJI Mini 3 Pro uses a completely new design for observation sensors. As a result, the sensors are not covered by the propellers when flying backwards. It improves detection range and performance to provide you with more security.
How is the wind resistance of the dji Mini 3 Pro?
Mini 3 Pro’s wind resistance is 10.7 m/s (level 5).
Wind resistance depends on the drive power. Due to the low weight of the drone, minor vibrations can be expected in strong winds. A powerful drive ensures that the drone hovers stably or returns safely to the starting point. The DJI Mini 3 Pro automatically controls the gimbal to adjust slightly to ensure footage is always stable and not affected by wind.
Does the Mavic Mini 3 Pro support manual settings for recording photos and videos?
Yes. You can manually adjust camera parameters such as shutter speed, ISO, and white balance in the DJI Fly app.
How to enable HDR on Mini 3 Pro?
Photo Mode: For single photo mode, the DJI Mini 3 Pro can detect the scene and automatically activate HDR for better dynamic range.
Video Mode: DJI Mini 3 Pro automatically enables HDR when recording video at 30fps or less.
Which video resolution of the dji Mini 3 Pro provides the best picture quality?
When shooting at 4K/30fps, the dji Mini 3 Pro can deliver optimal video quality that takes into account both dynamic range and image detail.
If you need a smoother video, you can set the frame rate to 48/50/60 fps. Dynamic range is reduced at this frame rate.
How does DJI O3 video transfer improve compared to OcuSync 2.0?
The DJI O3 video transmission system uses a completely new solution that now uses 4 antennas instead of 2 to enable Full HD video transmission over distances of up to 12 km (FCC compliant). Thanks to stronger resistance to signal interference, transmission stability in cities and other complex environments is also further improved.
How has fast transfer improved on the Mini 3 Pro?
Fast Transfer DJI Mini 3 Pro supports high-speed photo and video transfer up to 25 MB/s.
What is the maximum flight height of the DJI Mini 3 Pro?
The maximum flight height is 500 meters to maintain flight safety. This may vary in different countries and regions due to local laws. Please always check local regulations and laws before flying.
How often do the propellers of the Mini 3 Pro need to be replaced? How can I change the blades?
Before each flight, propellers should be checked for cracks, wear, deformation, rust, and loose screws. If any of these factors are evident, it is necessary to fix it.
Follow the instructions in the manual to replace the blades. Use the existing screwdriver to replace the propellers. Please follow the instructions provided. Remove the two blades and screws from the engine and replace them with new blades and screws from the same package. Marked propellers must be installed on marked engines and unmarked propellers on unmarked engines. Before flying, make sure that the propellers and engines are tight.
Can I use other USB-C chargers to charge the Mavic Mini 3 Pro?
Yes. To charge the device quickly, we recommend using the DJI 30W USB-C charger or other compatible charger.
What are the features of the DJI Mini 3 Pro dual-channel charging station?
The Mini 3 Pro two-way charging station supports USB PD fast charging protocols and can charge up to three batteries in a row. You can also use it as a power bank to charge your mobile device or remote control via the USB-A port.
How to update dji mini 3 pro firmware?
When you connect the drone to the remote control. The DJI Fly app will notify you when new firmware is available. Follow the instructions to update the quadcopter firmware, remote control, battery and other parts.
When updating the firmware, what factors cause the update to stop?
1. If the battery level of the aircraft or remote control is less than 20%, the update will be incomplete.
2. DJI Mini 3 Pro or remote control should be turned off during the update. If this happens, you will need to restart the quadcopter and remote control and run the update again.
3. The Internet connection was interrupted while downloading the operating system.
4. Using another program while updating the firmware may result in an error.
Which of the accessories of the DJI Mini 2 can be used for the DJI Mini 3 Pro?
The Mini 3 Pro is compatible with the DJI RC-N1 remote control and related accessories, as well as the DJI 18W USB charger. Other Mini 2 accessories are not compatible with Mini 3 Pro.
Which remote control is compatible with DJI Mini 3 Pro?
The Mini 3 Pro currently supports two remote controls: the DJI RC-N1 remote control and the DJI RC remote control.
Does the Mini 3 Pro support DJI Goggles or DJI Motion Controller?
Not.
To buy this product, visit the quaduae store, a DJI Drone dealer in Dubai.